IDUINO Prototype Shield
Item No.: EX025
This USB Host Shield allows you to connect a USB device to your
Arduino board. It is based on the MAX3421E, which is a USB
peripheral/host controller containing the digital logic and analog
circuitry necessary to implement a full-speed USB peripheral or
a full-low-speed host compliant to USB specification rev 2.0.
Works with standard (dual 5/3.3V) and 3.3V-only (for example,
Arduino Pro) boards. Operates over the extended -40°C to +85°C
temperature range Complies
with USB Specification
Revision 2.0
(Full-Speed 12Mbps
Peripheral, Full-/Low-Speed
12Mbps/1.5Mbps Host)
Arduino board. It is based on the MAX3421E, which is a USB
peripheral/host controller containing the digital logic and analog
circuitry necessary to implement a full-speed USB peripheral or
a full-low-speed host compliant to USB specification rev 2.0.
Works with standard (dual 5/3.3V) and 3.3V-only (for example,
Arduino Pro) boards. Operates over the extended -40°C to +85°C
temperature range Complies
with USB Specification
Revision 2.0
(Full-Speed 12Mbps
Peripheral, Full-/Low-Speed
12Mbps/1.5Mbps Host)
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115