RGB LED Module
Item No.: SE010
RGB LED module consists of a full-color LED made by R, G, B three pin PWM voltage input
can be adjusted. Primary colors (red / blue / green) strength in order to achieve full color
mixing effect. Control of the module with the Arduino can be achieved Cool lighting
effects. And three resistor has been soldered on
this board, so needn’t worry to burn out the LED
can be adjusted. Primary colors (red / blue / green) strength in order to achieve full color
mixing effect. Control of the module with the Arduino can be achieved Cool lighting
effects. And three resistor has been soldered on
this board, so needn’t worry to burn out the LED
light under the long time work.
• Red Vf: 1.8 to 2.1V
• Green Vf: 3.0 to 3.2V
• Blue Vf: 3.0 to 3.2V
• Red color: 620-625 nm
• Green color: 520-525 nm
• Blue color: 465-470 nm
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
Large Microphone ModuleItem No.: ST1146 -
Easy IR Transmitter ModuleItem No.: SE028 -
24-in-1 Sensor Learning Kit for ArduinoItem No.: KTS024 -
IDUINO MQ-3 Alcohol SensorItem No.: ME075 -
PIR Motion Detector ModuleItem No.: SE062 -
Sensor Expansion shield V4.0Item No.: ST1035 -
Easy Hit Sensor ModuleItem No.: se024 -
Easy Analog Temperature SensorItem No.: se026 -
Easy IR Receiver ModuleItem No.: SE027 -
Bluetooh Bee wireless moduleItem No.: ME116 -
Iduino Bluetooh Bee hc-05Item No.: ME121 -
5V Relay ModuleItem No.: ST1080 -
RC522 RFID ICItem No.: ME138 -
Obstacle Avoidance SensorItem No.: ST1081