DIY Metal Mechanical Paw for Iduino Robot without Servo
Item No.: AD086
This is a diy Metal Mechanical Paw for your Arduino robot,
shape as the picture show,
extending range from 0 mm
to 67 mm .
Claws Material: Aluminum.
Paw weight: about 68g
The following steering
( servo motor ) can be installed
in Korea HS322, HS422, 995 , etc.
Fraser steering , support Hitec,
Parallax, Futaba, Fraser and
other brands ( size of about 40 × 20 × 36mm) standard servos
shape as the picture show,
extending range from 0 mm
to 67 mm .
Claws Material: Aluminum.
Paw weight: about 68g
The following steering
( servo motor ) can be installed
in Korea HS322, HS422, 995 , etc.
Fraser steering , support Hitec,
Parallax, Futaba, Fraser and
other brands ( size of about 40 × 20 × 36mm) standard servos
Comment
Recommended Products
-
316L Stainless Steel Conductive Thread for Sewing E-textile 10mItem No.: AC137 -
2 Wheel Car ChassisItem No.: CC016 -
4 Wheel Car ChassisItem No.: CC018 -
2 Wheel Car ChassisItem No.: CC022 -
6 DOF steel Rotating Mechanical RoboticItem No.: AD085 -
DIY Metal Mechanical Paw for Iduino Robot without ServoItem No.: AD086 -
DIY Metal Mechanical Paw for Iduino Robot without ServoItem No.: AD087-2 -
9g Micro Servo (1.6kg)Item No.: AC022 -
MG995 High Speed Digital Metal GearItem No.: AC022 -
Micro Servo - MG90SItem No.: AC031 -
Analog Feedback Micro Servo1.8Kg/4 lineItem No.: AD091 -
MG90S Servo Metal GearItem No.: AC031 -
Mini Breadboard (Clear)Item No.: AC019 -
830 Point Solderless Breadboard(White)Item No.: ST1184 -
700 Point Breadboard (Green)Item No.: AC029 -
700 Point Breadboard (Blue)Item No.: AC015