MCP4725 I2C DAC Breakout Module Development Board
Item No.: ME483
The MCP4725 is a 12-channel buffered voltage output DAC with
non-volatile memory (EEPROM) of. The user can configure the
register bit (2) and DAC input data (12) stored in nonvolatile
EEPROM (14-bit) memory. By setting the configuration register
bits DAC can be configured as a normal mode or power-saving
shutdown mode. The device uses a two-wire I2C-compatible serial
interface, and a voltage range of 2.7V to 5.5V single supply.
non-volatile memory (EEPROM) of. The user can configure the
register bit (2) and DAC input data (12) stored in nonvolatile
EEPROM (14-bit) memory. By setting the configuration register
bits DAC can be configured as a normal mode or power-saving
shutdown mode. The device uses a two-wire I2C-compatible serial
interface, and a voltage range of 2.7V to 5.5V single supply.
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115