DIY 2WD Smart Robot Car Chassis Kit
Item No.: CC013
Simple installation, stronger, with install guide;
- Support double layer chassis.
- Increasing mounting holes for 5-AA battery and 2-lithium battery.
- Has two speed disks hole can be used with speed sensor.
- Using strong 130 anti-jamming magnetic torque motors, motor running stability, jitter-free. Voltage 3~10V, transmission 1:48 than fast, speed cars best.
- Thickening to increase chassis, 22cm, two-wheel width 17.5CM, head width 15.6CM, Middle 12cm wide.
Measuring 7.2V idle current is about 130mA, around ground running current of 200mA
Comment
Recommended Products
-
316L Stainless Steel Conductive Thread for Sewing E-textile 10mItem No.: AC137 -
2 Wheel Car ChassisItem No.: CC016 -
4 Wheel Car ChassisItem No.: CC018 -
2 Wheel Car ChassisItem No.: CC022 -
6 DOF steel Rotating Mechanical RoboticItem No.: AD085 -
DIY Metal Mechanical Paw for Iduino Robot without ServoItem No.: AD086 -
DIY Metal Mechanical Paw for Iduino Robot without ServoItem No.: AD087-2 -
9g Micro Servo (1.6kg)Item No.: AC022 -
MG995 High Speed Digital Metal GearItem No.: AC022 -
Micro Servo - MG90SItem No.: AC031 -
Analog Feedback Micro Servo1.8Kg/4 lineItem No.: AD091 -
MG90S Servo Metal GearItem No.: AC031 -
Mini Breadboard (Clear)Item No.: AC019 -
830 Point Solderless Breadboard(White)Item No.: ST1184 -
700 Point Breadboard (Green)Item No.: AC029 -
700 Point Breadboard (Blue)Item No.: AC015